Ratoc Systems CBFW3 Manuál s instrukcemi stáhnout pdf (Strana 52)

System Settings

4-2

System Settings

To specify settings of the LX operations, choose System from the Setup menu.

for LX-110

for LX-120

AD Width

Select either of 16 bits or 24 bits as a quantization bits.

Sample

Select the sampling frequency. Select the sampling frequency series, including the sampling frequency to be

selected at the upper row. Then, select the sampling frequency within the list shown at the lower row. They

are to be limited, based on the selected recording media and the tachometer pulse input channels. See

“Sampling Frequency and Number of Channels” on page 1-13.

Select sampling frequency

Lock the panel

Stop fan during recording

Record voice memos

Set the clock

Settings for monitor output

channels

Number of channels used for

recording at the slot 1

Enable the slot

Tabs for setting items

Calibration

Execute zero balance automatically when setting ST amp.

Adjust to PC clock before REC STANDBY

Apply the

same channel

settings as the channel last

changed

Specify the number of

quantization bits

Select sampling frequency

Lock the panel

Stop fan during recording

Record voice memos

Set the clock

Settings of monitor output

range and generator output

Number of channels u

sed

for recording

at the slot 1

Enable the slot

Calibration

Execute

zero balance automatically when setting ST amp.

Adjust to PC clock before REC STANDBY

Apply the same channel

settings as the channel

last changed

Specify the number of

quantization bits

Setting for monitor output

range

Settings for monitor output

channels

Tabs for setting items

Tachometer input channels

setting overview

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 145 146

Komentáře k této Příručce

Žádné komentáře

Ratoc Systems CBFW3 Manuál s instrukcemi Strana 52

Komentáře k této Příručce

Související produkty a manuály pro Sítě Ratoc Systems CBFW3